Home / Products / Water Well Drilling Rig / Truck Water Well Drilling Rig / JXY200C Muntipurpose Hydraulic Spindle Core Bore Drilling Machine

JXY200C Muntipurpose Hydraulic Spindle Core Bore Drilling Machine

Chassis: 4x2

Max.Drilling Depth: 200m

Drilling Method: Mud Drilling

>> Application

JXY200C Muntipurpose 4x2 Truck Mounted Hydraulic Spindle Core Bore Drilling Machine is designed for Geological survey and prospecting, exploration roads and high-rise building foundation, as well as a variety of concrete structure inspection holes, rivers and dams, embankment grouting hole drilling and grouting direct civilian wells and geothermal central air conditioning.The machine is reasonable in structure, simple in operation, convenient in maintenance and convenient in transportation, and no need to lift by crane after it is transported to the site.

Inquire Now Chat Now

PRODUCT DESCRIPTION

>> Characteristics

>>The truck chassis is a double cap, which is enough to carry the rig team and allows them to have a good rest.

>>The truck mounted drilling rig has four hydraulic stands, which assists the rig to balance during drilling.

>>The rig is has the full hydraulic control drill mast, which increases drilling safety and efficiency, reduces labor usage and saves cost.

>>The rig has the electric engine starter, which allows the machine to work in extreme weather condition.

>>The rig has two hydraulic slide tracks, which makes it easier to lift up the rod without opening the gear box. The slide device extends the life span of the rig.

>>The hydraulic tube twist machine can be installed, which helps to unload the rod.

>>The truck mounted drilling rig is full automatic, which is easy to operate and free of maintenance.

>> Specification

Description		JXY200C	Description		JXY200C
General	Drilling depth	30-200m	Mud pump	Rated flow	160L/min
	Drilling diameter	300-75mm		Rated pressure	1.3Mpa
	Max.Hole Diameter	500mm		Driving power	5.15kw
	Drilling Angel	90-75°		Main machine weight	190kg
	Mast height	7000mm		Dimension	1110725965mm
	Mast effective height	6500mm	Drill Pipe	Drill pipe length	4.2m
	Kelly/active pipe	59*53mm	Drill Pipe	Drill pipe diameter	42/50/60mm
	Weight(Without truck)	1650kgs	Chassis	Model	95Hp light truck
Spline	Structure	Ball bearing		Drive mode	4X2
	Spindle rotating speed	64/128/287/557r/min		Power Model	ZS1115E2
	Spindle stroke	450mm		Emission standard	Euro-5
	Spline Max.Torque	2400N.m		Rated power	70HP
Hoist	Max.Hoisting Capacity	1800kgf		Rotating speed	3200rpm
	Tight rope cubic caliber	26mm	Stabilizing Jack	2 front jacks and 2 rear jacks.
	Hoisting speed	17,35,75,151r/s		Type	Hydraulic
	Wireline diameter	12.5mm		Stroke	350 mm
	Main hoisting line capacity	35m	Dimensions	Overall length	6300 mm
Power Unit	Model	ZS1115 diesel engine		Overall width	2200 mm
Power Unit	Rated power	14.7kw/2200rpm		Overall height	3200 mm